The Ways of A Wind Turbing Working And Where It Have to be Located

The diagram gives the information about the ways of a wind turbine working and where it have to be located. It is important to note that the turbine basically needs strong airwaves, so there is an option to get optimum locations placing the turbine.

The airwaves turbine needs strong winds to work well and the best spot to locate the wind turbine is the highest open-place. The machine is placed where there are not trees that can block the airwaves. Sometimes, the wind turbine also places in the ocean although the highest spot is the best location because it can produce maximum wind.

If the wind has produced maximum waves, the generator gets big output. The process starts when the wind come and spin a blade which is made from fibreglass or wood. Because of achieving a strong wind, the wind machine has to be made from steel in order to support the process. Then, a wave sensor catches the energy by blade speed and direction. Afterwards, the wind which is produced is saved by a generator. The machine also is maintained by a computer, so there is a home where there is a computer inside to gain much information from the machine.

Finally, the wind machine is cheaper than other and it has an easy way to get many energies only from the wind. It is really useful because the machine can produce many energies for citizen needs.

• 
  It is a wrong picture
  
• 
  Graph_1.2.jpg
  

The diagrams illustrate a design of a wind turbine and its appropriate location. As seen, there do seem to be complicated tools needed, while some steps should be taken into account. In any case, some appropriate places are proposed so as to generate more energy from the wind.

- there are NO trees BLOCKING the airwaves.
- the MACHINE GENERATES MAXIMUM output.
- The process starts when the wind comeS and spinS a FIBERGLASSED or WOODEN blade.